Data Driven Disinfection™
Surface & Air Disinfection
Air & Surface Disinfection
Airocide Air Purification
For over 20 years, Airocide® air purifiers have been the air disinfection system for mission-critical environments. FDA Cleared as class II medical devices, Airocide® units have unparalleled efficacy, and unlike many ionization based devices, produce no ozone or other harmful byproducts. Each Airocide® product draws in air from the room into a reaction chamber where destruction of any pathogens – viruses, bacterial, molds, fungi – or carbon-based compounds occurs in a process called Photocatalytic Oxidation.
Photocatalytic Oxidation is safe and efficient, developed for NASA and used to purify the air on the International Space Station.
|
|
The Official Air Purification Provider of the Boston Red Sox |
Going Beyond HEPA Filters
Lumicide™ Surface Disinfection
Lumicide’s connected and automated platform for surface disinfection brings significant advantages in safety, simplicity and efficacy over other approaches.
Infection control experts recognize that healthcare and other high-traffic / high occupancy facilities need to use multiple approaches to be effective in controlling the spread of dangerous pathogens.
UVC and other “no-touch” solutions presented in the chart are accepted as important supplements to manual cleaning.
Efficacy Against Coronavirus
The Lumicide disinfecting ribbon was tested against SARS-CoV-2 at CUBRC, a biosafety level 3 lab, resulting in 99.9% viral inactivation in just 5 minutes. The Lumicide disinfecting mirror and disinfecting drain were tested at ResInnova Laboratories, a biosafety level 2 lab, against OC43 human coronavirus, C. diff, E. coli, MRSA and H1N1 showing greater than 99.9% viral inactivation.
UVC LEDs rapidly kill SARS-CoV-2
Full reports are available upon request.
Why Lumicide?
SLR-1
Lumicide Ribbon offers configurable options for placement above vanities, in restrooms, above desks or along countertops.
Disinfects hard surfaces within 12” of the unit, generating over 35 times the energy (mJ/cm2) required to kill pathogens in a typical disinfection cycle.
SLR-1
Lumicide Ribbon offers configurable options for placement above vanities, in restrooms, above desks or along countertops.
Disinfects hard surfaces within 12” of the unit, generating over 35 times the energy (mJ/cm2) required to kill pathogens in a typical disinfection cycle.
SLD-1
Lumicide Drain complements Lumicide Ribbon placements in the restroom and is the only device that automatically disinfects the high contamination-risk drain trap, generating over 9 times the energy (mJ/cm2) required to kill pathogens in a typical disinfection cycle.
SLD-1
Lumicide Drain complements Lumicide Ribbon placements in the restroom and is the only device that automatically disinfects the high contamination-risk drain trap, generating over 9 times the energy (mJ/cm2) required to kill pathogens in a typical disinfection cycle.
Clarity D3
Clarity D3 provides data at your fingertips:
- Disinfection Efficacy reports taking into account number of disinfection cycles, cycle time and UVC dose.
- Maintenance alerts and exception tracking.
- Program and monitor devices from your browser or mobile device.